Universal Testing Machine

Manufacturer of a wide range of products which include utm/ tensile/ mor/ shear test/ bonding/ tile testing machine and digital universal testing machine.

UTM/ Tensile/ MOR/ Shear Test/ Bonding/ Tile Testing Machine
UTM/ Tensile/ MOR/ Shear Test/ Bonding/ Tile Testing Machine
We are listed amongst the famous organization in the domain, engaged in offering Tile Testing UTM Machine. The given weigh batcher is acknowledged among customers for its superior functionality & easy installation. Offered weigh batcher is developed by utilizing high quality material and innovative technology in accordance with the international quality standards. In addition, our offered weigh batcher can be availed by our customers in varied specifications as per their needs.

Specification :-
  • Perform on M.o.r. testing, Bonding testing, Shear testing
  • Capacity:- 20KN ( 2 Ton/ 2000kg ) ,
  • For the Tile size upto 400mm x 400mm
  • Capacity:- 2 Ton / 2000kg ,
  • Type:- Bench Top / Digital ,
  • Testing Area :- Tension & Compression above moving cross-head ,
  • Horizontal Clearance:- 300-400mm ,
  • Vertical Clearance:- 914mm ,
  • Limit switches :- Adjustable ,
  • Cross-head travel:- 610mm
  • Cross-head speed range :- 0.5-50mm/min ,
  • Cross-head speed selection:- 0.1% increment of speed range ,
  • Speed Accuracy:- +/- 1% ,
  • Digital speed display :- English ,
  • Load weighing accuracy:- +/-0.5% of indicated load
  • Ranges:- 100 % of load cell in use ,
  • Auto overload protection :- Standard ,
  • Peak Load Recall:- Standard ,
  • Resolution:- 0.001mm,
  • For the tile size upto 400mm x 400mm
Digital Universal Testing Machine
A UTM is used to test both the tensile and compressive strength of materials. U T M are named as such because they can perform many different varieties of tests on an equally diverse range of materials, components, and structures. Most UTM models are modular, and can be adapted to fit the customer’s needs. U T M can accommodate many kinds of materials, ranging from hard samples, such as metals and concrete, to flexible samples, such as rubber and textiles. This diversity makes the UTM equally applicable to virtually any manufacturing industry.The UTM is a versatile and valuable piece of testing equipment that can evaluate materials properties such as tensile strength, elasticity, compression, yield strength, elastic and plastic deformation, bend compression, and strain hardening. Different models of U T M have different load capacities, some as low as 5 kN and others as high as 2000 kN.Tests can also be performed in controlled environmental conditions. This is achieved by placing the U T M into an environmental room or chamber. For example, metals testing can be conducted at extreme temperatures: from -196°C to over 100°C
  • Load frame - Usually consisting of two strong supports for the machine. Some small machines have a single support.
  • Load cell - A force transducer or other means of measuring the load is required. Periodic calibration is usually required by governing regulations or quality system.
  • Cross head - A movable cross head (crosshead) is controlled to move up or down. Usually this is at a constant speed: sometimes called a constant rate of extension machine. Some machines can program the crosshead speed or conduct cyclical testing, testing at constant force, testing at constant deformation, etc. Electromechanical, servo-hydraulic, linear drive, and resonance drive are used.
  • Means of measuring extension or deformation - Many tests require a measure of the response of the test specimen to the movement of the cross head. Extensometers are sometimes used.
  • Output device - A means of providing the test result is needed. Some older machines have dial or digital displays and chart recorders. Many newer machines have a computer interface for analysis and printing.
  • Conditioning - Many tests require controlled conditioning (temperature, humidity, pressure). The machine can be in a controlled room or a special environmental chamber can be placed around the test specimen for the test.
  • Test fixtures, specimen holding jaws, and related sample making equipment are called for in many test methods.
Specification :-
Range Speed Traverse
Diameter of rolls 50 mm
Clearance for tensile at fully descended working piston 750 kn
Measuring range 1000 kn
Load range with accuracy measurement 2 kn
Champing jaws for round Specimens of diameter 50 mm
Resolution of piston movement 0.1 mm
Camping jaws for flat Speciment of thickness 40 mm
Ram Strock 150 mm
Machine power 10 kw
Radius of punch top 50 mm
Voltage 440 volt
Table width adjustment rollers, width of roller 180 mm